Table of Contents
Advertisement
Section 1. Unpacking and Installation
Unpacking:
Before unpacking your Doran scale, please read the instructions in this
section. Your new scale is a durable industrial product, but it is also a
sensitive weighing instrument. Normal care should be taken when
handling and using this product. Improper handling or abuse can
damage the scale and result in costly repairs that may not be covered by
the warranty. If you notice any shipping damage, notify the shipper
immediately. Carefully remove the scale from the shipping carton. Be
sure to retain all shipping materials in case the scale must be shipped
elsewhere.
Installation:
Place the scale on a stable flat surface. Verify that the bubble level
located left of the scale display shows that the scale is level. Adjust the
four feet to obtain a level condition (bubble level centered).
Electrical Connections:
An optional transformer is available for 115 or 230 VAC operation. See
section 3 for installation instructions.
Be sure the AC power is not excessively noisy – this can occur if large
inductive loads, such as solenoids or motors, are on the same power
line. Subjecting electronics to problematic AC power lines may result in
damage not covered by the warranty. Also be sure that the power outlet
and transformer are not exposed to water while the scale is plugged in.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
