Auto Off Mode; Operation Mode; Auto Zero Tracking; Motion Aperture - Doran PC-500 Instruction Manual

Auto Off Mode

Ao
↑↑
oF
60
30
20
10
5
4
3
2
1

Operation Mode

oP
St
44

Auto Zero Tracking

2t *
of
0.5
3.0
1.0

Motion Aperture

nnA *
1
3
5
NOTE: The Legal for Trade mode disables certain options and selections listed above.
These items have been indicated by an asterisk ( * ).
↑ Indicates non-metrological parameters available from the quick setup mode.
Auto Off Mode
The amount of time before the scale will
shut off, if not in use. (Stays on if
plugged in.)
Off. Scale will run continually
60 minutes
30 minutes
20 minutes
10 minutes
5 minutes
4 minutes
3 minutes
2 minutes
1 minute
Sets the scale for Legal for Trade mode
Standard mode. NOT legal for trade.
Legal for trade setting
# of displayed divisions that are
automatically zeroed from displayed
zero, while the scale is stable.
Zero tracking is disabled
1/2 division
3 divisions
1 division
# of displayed divisions that must
change before motion is detected.
1 division
2 divisions
3 divisions