Section 5. Setup Menus Explained
Resolution Setup Menu
div
2.5
5.0
10
Capacity Setup Menu
CAP
5
10
25
50
Calibration Menu(s)
CAL
0
CAL
Reset All Parameters to Default Settings?
rst
n
y
Select Scale Capacity (lbs)
# of scale displayed divisions is 2,500.
NOTE: Use this resolution for Legal for
Trade applications.
# of scale displayed divisions is 5,000
# of scale displayed divisions is 10,000
Select Scale Capacity (lbs)
Scale capacity set to 5 pounds
Scale capacity set to 10 pounds
Scale capacity set to 25 pounds
Scale capacity set to 50 pounds
Zero Calibration Point
Press ZERO to calibrate zero point
Span Calibration Point
Full scale calibration is required. Press
ZERO to select calibration units.
NOTE: This parameter is only visible after a
zero calibration is performed.
Default parameters?
No. Parameters are not defaulted.
Yes. Set all parameters to their default
values when UNITS is pressed.