Electrical Connections On The Outdoor Unit Side - Fujitsu Waterstage WOYA060LFCA Installation And Operating Manual

Air to Water Heat Pump, split system
5 .3 Electrical connections
on the outdoor unit side
Access to the connection terminals:
• Models Comfort 5, 6, 8
• Models extensa duo + 5, 6 & 8
- Remove the cap.
• Model Comfort 10
• Model extensa duo + 10
- Remove the front panel, remove the cap.
- Make the connections in accordance with the diagram
figure 33, page 42
- Use cable clamps to prevent the conductors from
being disconnected accidentally.
- Fill in the space where the cables enter the outdoor
unit with the insulating plate.
Terminal
block
Interconnection
between the external unit
and the hydraulic module
figure 30 - Connections to outdoor unit's terminal block
(models extensa + 5, 6, 8 & 10)
- 38 -
General electrical
supply
" Models Comfort 5, 6 & 8
Cable clamp
Cables
" Model Comfort 10
figure 31 - Access to outdoor unit's terminal block
(models extensa + 5, 6, 8 & 10)
Installation and operation manual "1764 - EN"
Remove the cap
(2 screws)
Brackets
(4 places)
Bracket
(3 places)
Remove the
front panel
(2 screws)
Remove the cap
(1 screw)
Brackets (4 places)