2.2 Step 1: Install LoRaMoteConfig
Double click the installer "LoRaMoteConfigSetup.exe" and follow the on-screen instructions. The .NET Framework will be
installed automatically if not already present on the machine. The required material is available in the installation directory:
Figure 2-3: Installation Directory
2.3 Step 2: Install STM VCP Drivers
In order to establish connection between the LoRaMote and LoRaMoteConfig, a serial communication must be established.
Simply navigate to"/vcp" in the installation sub-folder, and launch "VCP_V1.4.0_Setup.exe"
Figure 2-4: VCP Installation
LoRaMoteConfig
User Guide
Rev 1.2
UG001_SXC_V1.2
December 2016
www.semtech.com
6 of 15
Semtech