Loramoteconfig Functionality; Saving And Restoring Parameters; Activation Tab - Semtech Lora Mote User Manual

3. LoRaMoteConfig Functionality

Most parameters related to the implementation of a sensor connected to a LPWAN network following the LoRaWAN R1.0
specification, can be modified by the PC application for later use in a stand-alone fashion. They are stored in the E2PROM
of the host microcontroller.

3.1 Saving and Restoring Parameters

Figure 3-1: Control buttons
• Write: Writes the current configuration to the EEPROM
• Read: Reads the current configuration from the EEPROM
• Defaults: Resets the configuration to its default values
• Reset: Resets the LoRaMote. The new configuration is only applied once the LoRaMote has been reset.

3.2 Activation Tab

Figure 3-2: Activation Tab
Activation method (OTAA or Personalization) can be selected here. Depending on the chosen method, parameters can be
modified:
• OTAA: AppEUI and AppKey. An automatically-calculated AppKey is proposed to simplify the process, and will be
unique to each DevEUI
• Personalization: AppSKey and NwkSKey can be programmed here
LoRaMoteConfig
User Guide Rev 1.2
UG001_SXC_V1.2 December 2016
www.semtech.com 9 of 15
Semtech