Installation; Prerequisite - Semtech Lora Mote User Manual

2. Installation

2.1 Prerequisite

Please download the latest LoRaMoteConfig installer file from the Semtech web repository.
The requirements are:
• a Personal Computer running Windows 7 (tested), Windows 8 (untested) or Windows 10 (untested)
• ST Microelectronics Virtual Com Port (VCP)
• DfuSe drivers for bootloader mode, this is only needed for the LoRa Mote
• Microsoft .NET Framework 4.5 installation is automated and described below.
As far as hardware is concerned, Semtech's (or IMST's) LoRaMote and Mote II are supported:
Figure 2-1: LoRaMote
Figure 2-2: Mote II
LoRaMoteConfig
User Guide Rev 1.2
UG001_SXC_V1.2 December 2016
www.semtech.com 5 of 15
Semtech