Setup And Operation Of The Lr1110 Trackers; Download And Install Bluetooth Phone Application; Putting Batteries In The Lr1110 Tracker - Semtech LoRa Edge Tracker Reference Design Evaluation Kit User Manual

Table of Contents

Setup and Operation of the LR1110 Trackers

The LR1110 Trackers are shipped with batteries outside of the unit so that they will not transmit while in

transport. This section will provide the instructions for the setup of the device, pairing it with its

initialization phone application and connecting to the services it supports.

The first step in setting up your devices is to download, install and run the Bluetooth Phone application

that enables the initial configuration of the LR1110 Tracker device. The LR1110 Tracker application is

available on Google Play for Android under the name "LR1110" or via the APK provided on a thumb

drive. For IOS users, search the App Store for "LR1110" and download and install the application.

Once the application is downloaded to your phone, run the application.

The process for putting the supplied batteries in the Tracker as follows; first remove the four screws from

back cover from the device using a T8 Torx head screwdriver:

Next, insert the batteries in the desired orientation:

Table of Contents