Step 3: Upgrade The Firmware; Loramote Firmware Upgrade - Semtech Lora Mote User Manual

2.4 Step 3: Upgrade the Firmware

2.4.1 LoraMote Firmware Upgrade

2.4.1.1 Install the DfuSe 3.0.5 Utility in the LoRaMote
• This utility is required to re-flash the LoRaMote without the use of a JTAG programmer. Simply navigate to the /dfuse
subdirectory, double-click "DfuSe_Demo_V3.0.5_Setup.exe" and follow the on-screen instructions.
• Launch "DfuSeDemo.exe"
• The device will appear in the "Available DFU and compatible HID Devices" drop-down list, select it
• Select both offered options, as below:
Figure 2-5: DfuSe Programming Options
• With the "Choose" button, navigate to the "mote-bin" sub-folder and select the binary file,
"LoRaMoteConfig-eu868.dfu"
Figure 2-6: Firmware DFU File Location
• A warning message will be displayed when the "Upgrade" button is hit, select "OK"
The firmware of the LoRaMote is now up-to-date, and compatible with the installed version of LoRaMoteConfig PC utility.
LoRaMoteConfig
User Guide Rev 1.2
UG001_SXC_V1.2 December 2016
www.semtech.com 7 of 15
Semtech