Intended Use; Package Contents - Silvercrest SHLF 2000 C1 Operating Instructions And Safety Instructions

Congratulations!
By purchasing the SilverCrest SHLF 2000 C1 fan heater with display, hereinafter referred to as the
fan heater, you have opted for a quality product.
Before first using it, familiarise yourself with the way the fan heater works and read these operating
instructions through carefully. Be careful to follow the safety instructions and only use the fan heater
as described in the operating instructions and for the applications given.
Keep these operating instructions in a safe place. If you pass the fan heater on to someone else,
make sure to give them all the relevant documents with it.

1. Intended use

The fan heater is designed exclusively for heating and ventilating inside spaces. This fan heater may
not be used outdoors or in tropical climates. The fan heater may also not be used in spaces where
there are specific conditions such as an explosive atmosphere (e.g. because of gas, dust or steam).
This fan heater has not been designed for corporate or commercial use. Use the fan heater in
domestic environments for private applications only. Any other use does not correspond to the
intended use. This fan heater fulfils all standards and directives listed in the Declaration of
Conformity. In the event of any modification to the fan heater that was not approved by the
manufacturer, compliance with these standards is no longer guaranteed. The manufacturer shall not
be liable for any damage or malfunctions resulting from such modifications.
Observe the regulations and laws in the country of use.

2. Package contents

Remove the fan heater and all the accessories from the packaging. Remove the packaging material
and check that all components are complete and undamaged. If you find anything missing or
damaged, please contact the manufacturer.

SHLF 2000 C1 fan heater

Remote control

CR2025 button cell

These operating instructions
SilverCrest SHLF 2000 C1
English - 25