Daily cleaning
Schaerer Coffee Art
Refer to the safety instructions and to the chapter "Cleaning" inside the user manual!
Never reach into the machine or under the beverage outlets during the automatic cleaning!
The following cleaning possibilities are available:
1. Automatic rinsing
2. Hot rinsing
3. Milk tube rinsing
4. Complete cleaning
1
• Press the
button (± 4 seconds).
cleaning program
remove container
• Pull out the grounds container
(within 5 sec.) and clean it.
• Clean the brew area with the brush.
• Re-place the grounds container.
4
• Press the
button.
cleaning program
Cleaning program is running!
(duration: ± 1,5 minutes).
= Self starting (programmed)
= Press the
= Press the
= Press the
2
Wait until the display shows:
cleaning program
insert tablet
Display
• Insert the cleaning tablet.
• Press the
cleaning program
selection locked
Cleaning program is running!
(duration: ± 5 minutes).
5
Wait until the display shows:
cleaning program
rinsing water
Display
• Rinse the cleaning container and fill
it with 500 ml of cold water.
• Place the tubes in the container.
button once (rinse duration: ± 10 seconds)
button twice (rinse duration: ± 10 seconds)
button for 4 seconds (procedure described as follows):
Display
button.
Display
Display
3
500 ml
50 ml
Wait until the display shows:
cleaning program
cleaning agent
• Fill the cleaning container with
water and cleaning agent.
Dosage:
Daypure:
Water (15 °C - 25 °C):
• Place the tubes in the container.
6
• Press the
button.
cleaning program
Rinsing is running!
(duration: ± 1,5 minutes).
Prosecution: see back side
Display
50 ml
500 ml
Display
Need help?
Do you have a question about the Coffee Art and is the answer not in the manual?
Questions and answers