Advertisement
DURACRYL WALL
BEFORE YOU BEGIN
!
Read all instructions carefully before starting the installation to ensure the best
possible results. It is the responsibility of the installer to ensure that the installation
complies with council and local authority bylaws.
IMPORTANT
Before installing the liner, ensure the moulded feature is not obstructed.
• Corner Contour (and Plus) walls - there should be no plumbing fittings within 300mm of the corner.
• Side Recessed Walls - there should be no interference within 400mm of the corner on the side
that the moulded shelving egresses into the framing cavity.
Instructions, drawings, and diagrams contained in this manual present information available at the time of printing. Although every attempt
has been made to keep them up-to-date, Kohler Company reserves the right to implement product changes without further notice.
TOOLS AND MATERIALS REQUIRED
Tape measure
Drill
Drill bits
!
IMPORTANT
Soft pencil
Spirit level
Use only recommended sealants and adhesives, suitable on acrylic and
acrylic capped ABS; unsuitable products may damage the Duracryl wall.
INSTALLATION INSTRUCTIONS
Jigsaw (fine blade)
Hole saw
BACKED-OFF CUTTING EDGE
Page 2
Caulking gun
Fine toothed saw
ENGLEFIELD
Advertisement
