Calling Up Information; Information In The Function Area; Information In The Menu; Checking Messages - Viessmann VITOTRONIC SPS Operating Instructions Manual

Checks

Calling up information

Information in the function area

The system is displayed graphically in the function
area; see Fig. 1, page 10.
You can call up additional information for each system
component.
Tap the following on-screen buttons:
1. If necessary, for the home screen

Information in the menu

The following information can be checked in the
menu:
■ "Operating info"
■ "Service information"
■ "Contact information"
"Appl. limits"
■
Tap the following on-screen buttons:
1. If necessary, for the home screen

Checking messages

If any messages are present, the
the navigation area.
Symbol Colour coding
Grey
Red
Orange
Blue
1. should be tapped in the navigation area.
All messages appear in a list, sorted by time.
2. Make a note of the fault code. For example: 32
"Prim. circ. press. too low".
This enables the system installer to be better pre-
pared. In addition, unnecessary travel costs may
be saved.
3. Notify installer.
20
2. Tap on the required system component to see fur-
2.
3. Select the required menu point.
symbol flashes in
Meaning
No message
Fault
Warning
Message/prompt
4. With "Acknowl.", all messages in the alarm list
ther information about it, e.g. current temperatures.
are acknowledged.
Note
The fault must be rectified.
in the "Status" column turns grey.
!
Please note
Repeated acknowledgement of the same
fault can lead to system damage and may
cause considerable costs.
Do not acknowledge fault messages several
times in quick succession.
If a fault recurs, notify the system installer
and have the fault rectified.