Menu Description - Carel k.Air User Manual

7. Menu description

7.1 Menu tree
k.Air +030220981 rel. 1.1 – 31.03.2020
Note: the parameters displayed depend on the password entered. See chap. User interface and the
Parameter table;
The parameters accessible on the PGDE terminal are organised into a menu structure based on
categories.
Press Prg to access the main menu. Select the parameter category using UP/DOWN and confirm by
pressing Enter. If a password is required, enter each digit using the Up/Down buttons and confirm by
pressing Enter. If no button is pressed for a certain time, the password will need to be entered again. The
menu is based on the devices available on the unit; items corresponding to devices that are not available
are not shown.
A. Unit
B. Fans
C. Dampers
D. Coils
Enter
E. Heat exchanger
password
→
F. Humidifiers
G. Filters
H. Auxiliary control
I. IEC
J. VDI
T. Alarm logger
U. Compressor
V. EXV
W. In/Out
ENG
a. Set points
b. Scheduler
c. Configuration
d. Manual Mode
a. Configuration
b. Supply
c. Return
a. Main coil
b. Preheating
c. Reheating
a. View
b. Export
a. Configuration
b. BLDC
c. Power+
7. Menu description | 57