Setting The Time And Day Of The Week; Setting The Time Bands - Carel k.Air User Manual

5.4
Setting the time
and day of the
week
5.5
Setting the time
bands
k.Air +030220981 rel. 1.1 – 31.03.2020
Message
FAN SPEED
Speed 1
Speed 2
Speed 3
Automatic speed
TIME BAND NO.
Note: the time band icon indicates:
1. when programming the time bands, the start time of the corresponding time band;
2. during operation: the current time band.
The current time and day of the week can only be set on the pGDE terminal.
Important: setting the time and day of the week on the th Tune terminal HAS NO effect.
See the paragraph at the end of the chapter. The time bands set on the th- Tune terminal are only
effective when the k.Air controller is in Comfort mode. In Economy mode, the unit set point depends on
the set point configured on the corresponding screen on the controller.
Example 1
Given the following conditions:
unit in cooling mode with room temperature probe used as the control probe;
l
time bands on pGDE not active;
l
time bands on th-Tune set as follows:
l
Band Start time
A 5.00
B 6.00
C 7.00
D 8.00
Description
ICON
Icon
ENG
Set point
19°C
18°C
19°C
18°C
5. th-Tune (accessory) | 47