Parameters - Siemens SIMATIC ET 200SP Manual

4.2

Parameters

Parameters of the AQ 4xU/I ST
The effective range of the parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with an S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module using the data records; refer to the section Parameter
assignment and structure of the parameter data record (Page 31).
The following parameter settings are possible:
Table 4- 2 Settable parameters and their defaults (GSD file)
Parameters
Diagnostics
No supply voltage L+
Diagnostics:
Short-circuit
1
Diagnostics
Overflow
Diagnostics
Underflow
Diagnostics
wire break
2
Output type/range
Reaction to CPU STOP
Analog Output Module AQ 4xU/I ST (6ES7135-6HD00-0BA1)
Manual, 03/2016, A5E03573365-AD
Value range
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
deactivated
•
Voltage +/- 10 V
•
Voltage +/- 5 V
•
Voltage 0..10 V
•
Voltage 1..5 V
•
Current +/- 20 mA
•
Current 0 - 20 mA
•
Current 4 - 20 mA
•
Turn off
•
Keep last value
•
Output substitute value
•
Default Configuration
in RUN
Disable yes
Disable yes
Disable yes
Disable yes
Disable yes
Current 4 - yes
20 mA
Turn off yes
Parameters/address space
4.2 Parameters
Effective range with configuration
software, e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Module Module
Module Module
Module Module
Module Module
Channel Channel
Channel Module
17