Cleaning And Maintenance; Troubleshooting - Topcom BABYVIEWER KS-4248 User Manual

®
22
button to confirm your selection. Use the On/Off
button to go back one step.
– Enter the VOX menu to turn the VOX menu on or off.
– Enter the sensitivity submenu to set the sensitivity of the
VOX function to low, medium or high.
– Enter the sleep submenu, to set the sleeptime to 10, 30,
60 or 90 seconds. The monitor will automatically go to
VOX mode after the selected time period.
10.13 Night vision
The camera has 6 high-intensity LED's for picking up clear images
in the dark. When the build in light sensor
ambient light level as low, the LED's will automatically activate.
The image changes automatically into black and
white mode under the night vision mode.
10.14 Registering the parent unit with the baby unit
or registering a new camera.
Up to 4 baby units can be registered to one parent unit.
To re-register your baby unit, or to register a new baby unit, follow
the procedure below:
– Press the menu button
Use the arrow keys to highlight items, and use the menu
button to confirm your selection. Use the On/Off
22
button to go back one step.
– Select the camera with the up
keys. Press right
16
submenu.
– Highlight "pair'and press the menu button
pairing.
– Switch the baby unit ON. Press the pair button
(at the back of the camera).
– If registration is completed, camera video appears on
LCD screen and return to normal mode. Baby unit will
return to normal mode too.
– If the registration time is expired or registration is failed,
"Out of Range" appears on LCD.
NOTE: If a particular channel had been registered already,
register this particular channel again will over-write the old
registration.
10.15 Selecting the camera
When more than 1 camera is registered.
– Enter the camera menu. The camera numbers are
displayed.
– Select the camera with the up
keys. Choose a camera by pressing the menu
16
button .
22
10.16 Settings menu
– Go to the main menu with the menu button
enter the settings menu. You can change several
settings in this menu.
– Set the language of your choice.
– Set the temperature unit to Fahrenheit or Celsius.
– Set the utility frequency to 50 or 60 Hertz, depending on
your region.
10.17 Pan and tilt (only for the KS-4249)
– Press and hold the menu button until arrows appear on
the display.
– You can now pan and tilt the the camera with arrow
buttons.
– If you don't press the arrow buttons for 30 seconds, the
arrows will dissappear from the display, and the controls
will revert to normal.

11 Cleaning and maintenance

This section contains important instructions for cleaning and
maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent
damage to the equipment due to improper maintenance.
6
measures the
9
to enter the main menu.
22
and down
15
to enter the pairing
18
to start
22
9 once
and down
15
and
22
Babytalker 3500 SEDS
11.1 Safety Instructions
DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and
unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can
cause injuries (skin irritation) or damage to the equipment.
Wear safety gloves.
CAUTION
• Do not use cleaning products or solvents. They can
damage the case or seep into the equipment and
cause permanent damage.
11.2 Cleaning
– Clean the equipment with a soft, slightly dampened
cloth.
– Clean soiled connectors and contacts with a soft brush.
– Clean the battery contacts and battery compartment with
a dry, lint-free cloth.
– If the equipment gets wet, switch it off and remove the
batteries immediately. Wipe the battery compartment dry
with a soft cloth in order to minimize potential water
damage. Leave the battery compartment open until it is
completely dry. Do not use the equipment before it is
completely dry.
11.3 Maintenance
– Check the batteries (regular or rechargeable) in the
equipment regularly and replace them when necessary.
– Check the connectors and cables for defects.
CAUTION
• If you suspect that the equipment is damaged, always
have it checked by an expert before using it again.

12 Troubleshooting

This section provides important instructions for localising and
correcting problems.
Follow these instructions in order to avoid hazards and damage.
12.1 Safety Instructions
DANGER
Risk of fatal injury due to electric shock!
• Unplug the power cable before attempting to correct a
problem.
CAUTION
Risk of hazard due to incorrect repairs
Incorrect repairs can expose users to serious hazards and
cause damage to the equipment.
• Never attempt to modify or repair the equipment.
• Always have repairs to equipment or cables performed
by a specialist or the service centre.
• If you suspect that the equipment is damaged (for
example, if it has fallen on the floor), have it checked
by a specialist before you use it again.
12.2 Problem causes and solutions
The following table is intended to help you localise and solve
minor problems.