Cleaning And Maintenance - Topcom BABYVIEWER 4500 User Manual

10.9 Switching the night light on and off
– Press the menu button
– Press the up
– Press the menu button
– After 10 seconds the parent unit will switch back to monitor mode.
10.10 Voice activated transmission (VOX)
During night and to save energy, the Babyviewer 4500 can be set in VOX mode.
In VOX mode, the display will be activated as soon as the microphone of the baby unit will capture sound.
You can set the sound detection sensitivity (VOX) of the babyphone. If the sensitivity is set to high, the baby unit
will pick up weaker sounds.
– Press button
– Repeatedly press button
• The VOX sensitivity is indicated by a black bar on the display:
– To switch off VOX mode, select "OFF".
– Press the menu button
– After 10 seconds the parent unit will switch back to monitor mode. The display will turn off until sound is
detected by the baby unit. In VOX mode, the VOX LED
10.11 Night vision
The camera has 4 high-intensity LED's for picking up clear images in the dark. When the build in light sensor
measures the ambient light level as low, the LED's will automatically activate.
The image changes automatically into black and white mode under the night vision mode.

11 Cleaning and maintenance

This section contains important instructions for cleaning and maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent damage to the equipment due to improper
maintenance.
11.1 Safety Instructions
DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can cause injuries (skin irritation) or damage to the
equipment. Wear safety gloves.
CAUTION
• Do not use cleaning products or solvents. They can damage the case or seep into the equipment and
cause permanent damage.
11.2 Cleaning
– Clean the equipment with a soft, slightly dampened cloth.
– Clean soiled connectors and contacts with a soft brush.
– Clean the battery contacts and battery compartment with a dry, lint-free cloth.
– If the equipment gets wet, switch it off and remove the batteries immediately.
Wipe the battery compartment dry with a soft cloth in order to minimize potential water damage.
Leave the battery compartment open until it is completely dry.
Do not use the equipment before it is completely dry.
8
3 times. The night light icon is displayed.
23
or down button
16 17
to confirm.
23
4 times. "VOX" is displayed.
23
or
16 17
- high sensitivity
- low sensitivity
to confirm.
23
to switch the night light "ON" (night light
to set the VOX sensitivity.
will illuminate.
21
Babytalker 3500 SEDS
2 is on) or "OFF".
9