Pnp Assembly Instructions; Install Main Wing; Install Horizontal Stabilizer - Freewing F/A-18C Hornet Manual

P NP Assemb ly In stru ctio ns
Inst all Ma in wing
As the photo show:
1. Insert the carbon tube to the fuselage.
2. Insert the ribbon wire to the main wing control board and install left/right wing on the fuselage.
3. Use screws to fix the main wing.
Step1
Install Horizontal Sabilizer
As the photo show:
1.Insert the left/right horizontal stabilizer to the shaft of tail fuselage, and use 4 pcs screws to fix.
2.Adjust the pushrod length to the correct position.
A-Horizontal Stabilizer
B-horizontal tail shaft
C-Screw
(KM3x8mm 4pcs)
Step2
As the photo show: Use glue to attach the plastic cover on the indicated position.
3
A
7mm
A-Carbon tube
（ 10x480mm 1pcs）
B-Ribbon wire
C-Controller Module
D-Screw
（PWM3x6mm 4pcs）
B
C
B
the plastic cover
F/A-18C Hornet
Item No : FJ314-V01
C
Step2
Step3
Step1