Install Vertical Stabilizer; Install Scale Accessories; Battery - Freewing F/A-18C Hornet Manual

P NP Assemb ly In stru ctio ns
Lnstall Vertical Stabilizer
As the photo show:
1.Pull the rudder servo cable along the slot into the battery compartment and install the vertical tail.
2.Use 6pcs screws to fix the vertical tail to prevent loosening.
A-Rudder
B-Rudder servo cable
C-Screw
（FA3x10mm 6pcs）
Battery Size
Cockpit
Velcro
Before connecting the battery and receiver, please
switch on the transmitter power and make sure
the throttle stick is in the lowest position. Bind your
receiver to your transmitter according to your
transmitter's instruction manual.
Install Other Accessories
Install nose cone
Install antenna of back fuselage
antenna of back fuselage
F/A-18C Hornet
Item No : FJ314-V01
Step2 Step1

Battery

Nose Cone
Use rubberized non-slip tape
or hook-and-loop tape
Battery cabin size:
L=300mm W=65mm H=60mm
We recommend the following LiPo battery:
6S22.2V 4500mAh~6S22.2V 5500mAh
Discharge rate of C
Install antenna of nose cone
> 35C
antenna of nose cone
4