KIT CONTENTS
This Users Manual.
HI‐3110 Evaluation Board and Schematic
HI‐3110 Data Sheet
RS‐232 Serial Cable
Software version 6
Demonstration Features
Transmit Modes for Standard and Extended Frames
Receive Modes, polled and interrupt driven
Monitor Mode
LoopBack Mode
Sleep Mode with wake‐up from Button press or CAN data
Selectable Bit Rates from 83.3KBPS ‐ 1MBPS
Print out the CAN buffers (64) on the serial console
Print out the status registers on the serial console
Print out the Transmit History FIFOs on the serial console
Print out the Error Status registers on the serial console
Configuring the INT, STAT and GP1 and GP2 outputs
SPI clock frequency selectable from 625KHz – 10MHz.
Test Mode for cycling GPIOs and LEDs as a board check
CAN Filters and Masks