Kit Contents; Monitor Mode - HOLT HI-3110 User Manual

KIT CONTENTS


This Users Guide.

HI-3110 Evaluation Board

HI-3110 Data Sheet

RS-232 Serial Cable

USB to Serial Adapter

Codewarrior™ Demo Software Project
Demonstration Features

Transmit Modes for Standard and Extended Frames

Receive Modes, polled and interrupt driven

CAN bus communication using two nodes


Monitor Mode


LoopBack Mode

Sleep Mode with wake-up from Button press or CAN data

Selectable Bit Rates from 83.3KBPS - 1MBPS

Print out the CAN buffers (64) on the serial console

Print out the status registers on the serial console

Print out the Transmit History FIFOs on the serial console

Print out the Error Status registers on the serial console

Configuring the INT, STAT and GP1 and GP2 outputs

SPI clock frequency selectable from 625 KHz – 20 MHz.

Test Mode for cycling GPIOs and LEDs as a board check

CAN Filters and Masks
4
AN-175
Holt Integrated Circuits