Technical Data; Circuit Diagram - Siemens BK20100M Installation And Operating Instructions Manual

V.
Electrical connection
The heater should only be connected to a prop-
erly installed, earthed socket.
Do not use a socket strip.
Do not plug the heater in to the electricity supply
until it has been mounted on the wall.
When installation has been completed
Explain the heater to the user and hand over the
operating instructions.

Technical data

Circuit diagram

E1 Heating element
H1 Pilot light
N1 Temperature selector/limiter
N2 Safety thermostat
X1 Power input terminals
14
320
max. Liter
5
4
3
2
1
min.
100 °C
110 110
L N PE
en
VI.
Distance from wall
If the heater is not going to be mounted flush on
the wall, use a standard pipe connecting piece and
bend stand-off "A" to the appropriate position.
1 Mounted flush on the wall
2 Wall mounting using commercially available
adapter piece a, 30 mm long
3 Wall mounting using commercially available
adapter piece b, 50 mm long, equipped with an
additional water connection
154
1
G
2
175
250
H1
N1
E1
N2