Fuse Replacement - Chauvet Hurricane Haze 2D Quick Reference Manual

EN Hurricane™ Haze 2D QRG
To Begin Unpack your Hurricane™ Haze 2D and make sure you have received all
parts in good condition. If the box or contents appear damaged, notify the
carrier immediately, not CHAUVET®.
The Hurricane™ Haze 2D is a water-based haze machine with continuous
Product
output and a digital display to set DMX and standalone functions with ease.
Description
It features adjustable blower output speeds and nozzle to get the haze where
you need it. An included wired, timer remote stores conveniently in the
fixture.
DMX
Mounting Bracket
LED Display
In/Out
Bracket
Adjustment
Fluid Level
Knob
Indicator
Product Overview
Remote Out
Power In
Fuse Holder
Back Panel View
Access
Side View
Panel
FCQ (Fog Cleaner Quart) was specifically developed by CHAUVET®
to clean your Hurricane™ Haze 2D. Make sure you use FCQ regularly
to increase the life of your product.
AC Power This product has a fixed voltage power supply and it can work with an
input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the
specific model.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
3