Linhai HY740STL 2018 Service Manual page 60

CHAPTER 3 ENGINE
⚫Rocker Arm Shaft & O-Ring 9.8×2.4
8. Install:
⚫Rocker Arm (intake)
⚫Rocker Arm Shaft & O-Ring 9.8×2.4
NOTE:
Before installing the Rocker Arm Shaft & O-Ring
9.8 × 2.4, check the O-Ring 9.8 × 2.4. If the
O-Ring is damaged, replace it.
9. Install:
⚫Washer d8 (aluminum )
⚫Lock Rocker Arm Bolt
NOTE:
When installs the Lock Rocker Arm Bolt, the
groove○, on the Rocker Arm Shaft should match
c
with the hole(○, /○,
a
If not, the Lock Rocker Arm Bolt maybe damage.
3.5.2 CAMSHAFT
Order
Camshaft removal
Cylinder Head
Bolt 6×12
1
Plate, Locate
2
Camshaft
3
⚫ Refer to "
CAMSHAFT INSTALLATION
) in the Cylinder head cover.
d
Job name / Part name
Q 'ty
1
1
1
1
" section. Reverse the removal procedure for installation.
M750L SERVICE MANUAL 18.0
Remarks
Remove the parts in order.
CHAPTER 3 ENGINE PAGE 3- 29