Linhai HY740STL 2018 Service Manual page 37

CHAPTER 3 ENGINE
M750L SERVICE MANUAL 18.0
3.2 PARTS INSPECTION AND SERVICE
3.2.1 VALVE CLEARANCE ADJUSTMENT
NOTE:
Valve clearance adjustment should be made
with the engine cool, at room temperature.
When the valve clearance is to be measured
or adjusted, the piston must be at Top Dead
Center (T.D.C.) on the compression.
1. Remove :
⚫Spark plug
2. Remove :

⚫CVT cover
3. Remove :

⚫ Water Pump

⚫ Observed Cover
4. Remove :
⚫ Valve cover (intake side)○,
1
⚫ Valve cover (exhaust side)
CHAPTER 3 ENGINE PAGE 3- 6