Linhai HY740STL 2018 Service Manual page 131

CHAPTER 3 ENGINE
DO: Use care during connection of harness to
module coupler.
DO: Return any dropped, damaged, or suspect
material with a tag that describes the problem.
3.18.9 Diagnostic Tools
3.18.9.1 Motor Scanner ( for MT05 EMS)
3.18.9.1.1 Precautions
Motor-Scanner is a precision instrument and should be protected from vibration
and impact.
If the unit does not run correctly or the screen is unstable when first turned on,
disconnect it from the main lead and try again.
Make sure the DLC is always firmly inserted into the diagnostic socket.
Never test electrical signals that exceed the limit of specifications.
Test cannot be performed by the person who is driving the car.
This unit should be used and stored in the following conditions:
Ambient temperature: 0~50℃
Relative humidity: <90%
3.18.9.1.2 Configurations
Delphi Motor scanner consists of 2 main part: the main units (with diagnostic main
cable) and diagnostic connector link (one end is 6PIN connector; the other is the
interface for connecting diagnostic main cable). They are shown in figure 34 as
below.
Ou t l i n e o f Ma i n Un i t
Avoid terminal damage.
Ensure fast and correct diagnosis of root
cause.
M750L SERVICE MANUAL 18.0
CHAPTER 3 ENGINE PAGE 3- 100