Mirror Atachment; Flexible Tubes - TESTO 319 Instruction Manual

5.2 Mirror attachment
Attaching m m irror a a ttachment t t o t t he t t ip:
Hold the flexible tube close to the tip. Press the open side of the clip on to
the metal of the tube end. The clip must be firmly attached. If the clip is
too loose, simply remove it and press the clip gently together with a pair of
pliers in order to achieve a more secure attachment.
Positioning t t he m m irror:

5.3 Flexible tubes

· Flexible gooseneck tube
· Decabon tube
· Two-channel hose (Multilumen hose)
Attaching t t ube a a ttachment:
Push tube attachment on until it is firmly attached.
Change tube attachments depending on application
Image guide
Light guide
Mirror
For an optimal view with the mirror, please
position it with the mirrored surface directly
over the image guide and as near as possible
to the end of the tube. For the best image
quality, always keep the mirrored surface
clean.
Before use in an in accessable place, the
mirror must be firmly attached to the end of
the tube.
For use:
see warning in chapter 3!
5. Operation 19