Advertisement
obelisc™
Assembly and disassembly instructions for
CS 2931G
2
obelisc
10
™
Assembly and disassembly instructions
Special cleaning instructions
Important: Excessive bending of
the flexible parts outside of the
holder should be avoided.
Manual cleaning
All lumens and cavities must be
rinsed out carefully and thoroughly.
The flexible part of CS 2931-12
must be rinsed at the rinse holes
with a disposable syringe.
Visual inspection
Finally, it must be checked whether
there is any visible soiling. If this
is the case, the previous steps
must be repeated. In particular the
flexible parts must be checked for
any soiling or damage.
Inserter maintenance
For their maintenance, movable
parts such as joints, hinges and
threaded parts should be treated
with suitable maintenance oil.
For other instructions see page 11
Advertisement
