Weider 831.153930f User Manual page 17

44. Wrap the Swivel Low Cable (72) over a 3 1/2" Pulley
(78). Attach the Pulley to the Offset Double "U"-
bracket (61) with a 3/8" x 1 3/4" Bolt (93) and a 3/8"
Nylon Locknut (87).
45. Wrap the Swivel Low Cable (72) under a 3 1/2"
Pulley (78). Attach the Pulley to the indicated brack-
et on the Long Base (120) with a 3/8" x 1 3/4" Bolt
(93) and a 3/8" Nylon Locknut (87).
46. Route the Swivel Low Cable (72) under the indicat-
ed stack of Weights (44).
Wrap the Swivel Low Cable (72) under a 3 1/2"
Pulley (78). Attach the Pulley to the indicated brack-
et on the Long Base (120) with a 3/8" x 1 3/4" Bolt
(93) and a 3/8" Nylon Locknut (87).
47. Wrap the Swivel Low Cable (72) over a 3 1/2"
Pulley (78). Attach the Pulley and a Cable Trap (68)
between the indicated holes in the Pulley Plates
(63) with a 3/8" x 2" Bolt (100) and a 3/8" Nylon
Locknut (87). Make sure that the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
48. Wrap the Swivel Low Cable (72) under a 3 1/2"
Pulley (78). Attach the Pulley to the indicated brack-
et on the Short Base (2) with a 3/8" x 1 3/4" Bolt
(93) and a 3/8" Nylon Locknut (87).
44
93
45
120
93
46
78
44
47
48
17
87
61
78
72
72
78
87
72
87
120
93
63
100
87
68
78
72
78
72
93
87
2