Danger - Ensure That The Main Power Switch Is Turned Off - ABB M2004 System Settings

1.2.1 DANGER – Ensure that the main power switch is turned off.
Description
Work with high voltage entails a potential lethal hazard. Persons subjected to high
voltages can suffer heart failure, burns or other serious injuries. To avoid such
injuries, never begin a job without first eliminating the risks to safety. These are
descried below.
Elimination
3HEA801233-001 Rev.- 2005-08
Action
1. Turn off the main power switch at the
control module.
The main power switch on the
control module switches off the
control voltage to all the drive
modules.
2. Turn off the main power switch (work
switch) on the respective drive
module to switch off the feed
voltage.
3. Single robot stations
DANGER – Ensure that the main power switch is turned off.
Info/Illustration
1
2
All voltage is lost when the main switch on
the drive module (DM1) is switched off.
Safety instructions
3