Table of Contents
Advertisement
1. GENERAL
1.1. WARNINGS
This product was manufactured according to rigorous technical safety rules in compliance with DC standards. The DC
declaration and the manual can be downloaded from the Internet.
Before installing and using this product, carefully read these instructions, which contain important indications to
ensure your safety and that of the users during the installation, commissioning and servicing of this product.
Once the installation is terminated, leave this manual in the machine for future consulting.
The installation of this product (implementation, connections, commissioning, maintenance) and all other interven-
tions must be performed by a professional, applying the recognized rules of good practice, standards and safety
regulations in force.
It must conform to the prescriptions related to Electromagnetic Compatibility (EMC) and the Low Voltage Directive
(LVD).
S&P shall not be held responsible for possible injuries and/or damages caused by the non compliance with safety
instructions or following a modifi cation of the product.
The ALTAIR 120 is designed for dual fl ow air ventilation with heat recovery for domestic applications.
Indoor installation:
• Minimum recommended ambient temperature for the unit +10ºC
• Limits, ambient temperature min. +10ºC and max. +50ºC
• Limits, air temperatures -18ºC and +50ºC.
• Relative humidity: max 95% non condensing.
• Atmosphere not potentially explosive.
• Atmosphere with low salt content, without corrosive chemical agents.
1.2. SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
• Wear appropriate IPE (Individual Protection Equipment) before any intervention.
• Before installing the unit, make sure that the support and placement are suffi cient resistant to withstand the units
weight.
• Do not open the access doors without fi rst switching off the electrical power supply.
• If the work is to be performed inside the device, switch off the electrical power supply on the main circuit breaker
and make sure that no one can accidentally switch it on.
• Make sure that the moving parts are stopped.
Before starting, check the following points:
• Make sure that the device does not contain any foreign body.
• Make sure that all the components are attached in their original placements.
• Check the earthing connection.
3
Advertisement
Table of Contents
