Home Base
Use the Home Base
At the end of a cleaning cycle or when Roomba's battery is running low, it returns
to the Home Base to charge. Roomba needs to fi nd the infrared signal of the
Home Base in order to return.
•
Always keep the Home Base plugged in. When the Home Base is fi rst
plugged in, its power light turns on momentarily to indicate the Home Base is
connected to the power source.
•
If Roomba returns to the Home Base and is unable to dock, it will try again
until it docks successfully.
•
When Roomba makes a connection and docks successfully, the Home Base
power light momentarily turns solid green. Within a minute of docking, Roomba
goes to sleep, turning off all lights, while continuing to charge the battery.
Home Base Location
Position the Home Base on a hard, level surface against a wall. Make sure it's at least
four feet (1.2 meters) from any stairs and that Roomba has a clear path to reach it.
Do not place the Home Base within four feet (1.2 meters) of a stairwell.
®
to charge the battery overnight before the fi rst use.
®
Roomba 700 Series Owner's Manual
EN
11
Need help?
Do you have a question about the Roomba and is the answer not in the manual?
Questions and answers
wheel problem errow 10
Error 10 on the iRobot Roomba means that a side wheel is stuck or the bumper is not detecting obstacles. If the Roomba is circling in one place, clean the side wheels by pushing them in and out and ensuring they turn freely. If it's not circling, the Roomba may be in a very large room and not detecting obstacles; use a Virtual Wall to create a smaller cleaning area.
This answer is automatically generated