Problems While Cleaning - iRobot Roomba Owner's Manual

Problems While Cleaning

Your Roomba
blinks and
says...
Error 1.
Move Roomba to a
new location, then
press CLEAN
to restart.
Error 2.
Open Roomba's
brush cage and
clean brushes.
Error 5.
Spin Roomba's
side wheels to
clean.
Error 6.
Move Roomba to a
new location then
press CLEAN to
restart.
Error 7.
Spin Roomba's
side wheels to
clean.
Error 9.
Tap Roomba's
bumper to clean.
Error 10.
Spin Roomba's
side wheels to
clean.
Please charge
Roomba.
Likely cause What to do
Roomba is Ensure Roomba's wheels are firmly on the floor. If
stuck with a Roomba is stuck, start in a new location. If Roomba
wheel hanging is not stuck, clean its side wheels of hair and debris.
down. Push the wheels in and out, and check that they
both turn freely.
Roomba's main Remove and clean Roomba's brushes.
brushes can't
turn.
Roomba's side Clean Roomba's side wheels. Push them in and
wheel is stuck. out and check that they both turn freely. Start in
a new location.
Roomba's cliff Wipe Roomba's cliff sensors with a dry cloth.
sensors are dirty Start in a new location.
or your Roomba
is hanging over
a drop.
Roomba's side Clean Roomba's side wheels of hair and debris.
wheel is stuck. Push them in and out and check that they both turn
freely. Start in a new location.
Roomba's Briskly tap Roomba's bumper several times
bumper is to dislodge any debris that may be trapped
compressed underneath.
or the bumper
sensor is dirty.
Roomba's side If your Roomba is circling in one place, clean side
wheel is stuck wheels. Push them in and out and check that they
or its bumper both turn. If it's not circling in one place, Roomba
isn't detecting may be in a very large room. Use a Virtual Wall to
obstacles. create a smaller cleaning area.
Roomba's Plug Roomba into the charger or place it on the
battery is dead. Home Base to charge.
Roomba 700 Series Owner's Manual
EN
29