iRobot Roomba Maintenance Manual

Maintenance Guide
To keep Roomba running at peak performance,
it is recommended that you perform the following
maintenance tasks after every use:
o [:ffi=ll"""ry e F#:lj;"ilii:.* €) 55:lRoomb
a. Press button and pull
to remove bin.
Clean Roomba's
brushes
a. Remove brush guard by
pushing both tabs.
b. Remove the brush end caps and use
scissors or the cleaninq tool to cut
any hair wrapped arou-nd the brushes.
c. Remove and clean hair and dirt
from Roomba's brush bearings.
b. Clean the area inside the robot and
replace wheel in reverse order.
Clean Roomba's
front wheel
Remove the front wheel assembly
module by pulling firmly on the
wheel assemblv. Remove tfre wheel
by pulling it away from the assembly.
({t.,
I Y
a. Unscrew side brush cap and
remove any trapped hair or dust,
Click brush back into position
and gently tighten screw.
a. Clean or replace filter - ifwashed,
don't put back until dry.
b. Clean filter compartment.
Clean Roomba's
sensors
b. Contact points
for home base
6si|
!ii:??:i{sffiil:i3:"J?t
:?rb%, *,
_:-
Salton Nl Customer Service 05OB 629 777
530 MG 171209
www.irobot.com www.roomba.Gom.au