Inserting And Removing The Filter - KitchenAid 5KEK1522 Owner's Manual

Hide thumbs

Advertisement

Table of Contents
CARE AND CLEANING
DESCALING THE ELECTRIC KETTLE
Water
White
vinegar
Calcium deposits may form on the interior
metal parts of the Electric Kettle. To get
the best performance from your Electric
Kettle, clean periodically. The cleaning
interval
will depend on the hardness of the water
you put into the Electric Kettle.

INSERTING AND REMOVING THE FILTER

Inserting the filter: The filter is located
behind the spout inside the Electric
Kettle. Open the lid. Slide the filter down
into the slot behind the spout, making
sure that the curve facing outward on the
filter matches to the curve of the kettle.
FOR DETAILED INFORMATION ON USING THE ELECTRIC KETTLE
Visit www.kitchenaid.com.au or www.kitchenaid.co.nz to download this Instruction
manual, and to register your Electric Kettle.
10 | CARE AND CLEANING
W11255998A.indb 10
©2018 All rights reserved.
Specifications subject to change without notice.
The use of a commercial descaler is
recommended.
If a commercial descaler is not available:
1. Fill the Electric Kettle with white vinegar
to the MIN (0.25 L) mark.
2. Add water to the 0.75 L mark.
3. Boil and allow to stand overnight.
4. Empty the solution from the Electric
Kettle.
5. Fill the Electric Kettle with water, bring
to a boil and drain out the water.
Repeat this step twice. The Electric
Kettle is now ready to use.
Removing the filter: Open the lid. Grasp
the top of the filter, behind the spout,
and pull out to remove.
10/10/2018 6:06:53 PM

Advertisement

Table of Contents
loading

  Also See for KitchenAid 5KEK1522

This manual is also suitable for:

3kek1522Kxc03a