American Standard SELECTRONIC 6053.193 Installation Instructions Manual page 6

B
AC VERSION; Fig. 2
•
PLUG-IN
•
HARDWARE
Disconnect AC power supply
CAUTION
before opening CONTOL BOX.
Note: For AC installation, make power supply connection
before mounting CONTROL BOX (3) to wall.
1. Remove CONTROL BOX COVER (1). Feed the
EXTENSION CABLES (2) from the Faucet through
the top of ENCLOSURE (3).
FOR AC PLUG-IN ONLY
2a. Insert POWER CORD (8) through POWER SUPPLY
GROMMET (9). Fig. 2a.
3a. Insert POWER CORD (8) through side GROMMET (6)
as shown. Fig. 2a.
4a. Connect one of the CABLES (2) to SOLENOID
CABLE (7) and the other to the SINGLE AC
ADAPTER (10). Connect POWER CORD (8) to Single
AC Adapter (10) and install CONNECTOR LOCKING
DEVICE (16). Fig. 2a.
5a. Mount CONTROL BOX to wall. Replace CONTROL BOX
COVER (1). Tighten cover screws firmly.
6a. Plug AC POWER SUPPLY into wall outlet.
FOR HARDWIRE HOOK-UP ONLY
2b. Insert one end of the 10' EXTENSION (10a) through
POWER SUPPLY GROMMET (9). Fig. 2b.
3b. Insert 10' EXTENSION (10a) through side
GROMMET (6) as shown. Fig. 2b.
4b. Connect CABLES (2) to SOLENOID CABLE (7) and the
other to the 10' EXTENSION CABLE (10a). Install
CONNECTOR LOCKING DEVICE (16). Fig. 2b.
Contractor to supply ELECTRICAL BOX (12) and power
to POWER SUPPLY (13).
5b. Mount POWER SUPPLY (13) onto ELECTRICAL
BOX (12). Connect connections to POWER SUPPLY
CONNECTIONS (14). Fig. 2c.
6b. Connect the10' EXTENSION (10b) to the POWER
SUPPLY CABLE (15). Fig. 2c.
CAUTION: Use only American Standard supplied cable sets.
Using non-AS supplied cables, or cutting, splicing or modifying
any components will void the warranty.
© 2019 AS America Inc.
Fig. 2
2
3
Fig. 2a
16
2
7
10 8
Fig. 2b 2
2
16
10a
Fig. 2c
12
6
1
PLUG INTO
WALL OUTLET
6
9
6
7
9
FROM ELECTRICAL BOX
WITH POWER SUPPLY
10b
10' EXTENSION
15
14
BLACK & WHITE
13
POWER
CONNECTIONS
M965651 Rev. 2.0 (3/19)