Setting The Lighting Led Brightness - Marantz MODEL 30 Owner's Manual

Contents Connections

Setting the lighting LED brightness

INPUT
Front panel Rear panel
Playback
TONE/BALANCE
DIMMER
Remote control 29
unit
Settings
Lighting LED brightness can be adjusted in 4 levels. It can also be linked
with the display's brightness. Switching the lighting off reduces a source of
noise that affects sound quality, enabling higher sound quality playback.
1
Press and hold TONE/BALANCE for 5 seconds or more.
The lighting setting menu is displayed on the display.
2
Use INPUT ml to change to desired setting.
Sync
(Default):
Bright / Dim / Dark / Off
3
Press TONE/BALANCE.
Setting is finalized and the display returns to usual status.
0 If no operations are made for 5 seconds or more while setting lighting LED
brightness or if other operations are performed, the setting is finalized and the
display returns to usual status.
0 When display brightness it set to off with DIMMER, the lighting LED turns off
regardless of the lighting LED brightness setting. (v p. 28)
Index
Tips Appendix
The brightness is synchronized to the
brightness of the display. (v p. 28)