Setting Remote Control Codes For The Remote Control; Setting Remote Control Codes For The Main Unit - Marantz MODEL 30 Owner's Manual

Contents Connections
Setting remote control codes for the
remote control
o To set the remote control codes to AMP1,
AMP2 or AMP3
1
Hold down i and one of the number 1, 2 or 3 buttons
for more than 5 seconds.
Set the remote control code to AMP1, AMP2 or AMP3 according
0
to the selected number button.
NOTE
0 The remote control codes returns to the default settings when the batteries are
removed. Set the remote control codes again after replacing the batteries.
Front panel Rear panel
Playback Settings
Setting remote control codes for the
main unit
1
Remote control 32
unit
Tips
Point the remote control for which the remote control
code was set at the main unit, and press i and ENTER.
When setting the remote control code of the main unit is complete,
the remote control code set (AMP 1 – 3) is displayed on the display.
Index
Appendix