Warning - Foxtech Bi-Focus User Manual

Warning

Please read the instruction carefully before install and use this product, and keep it in a safe place.
Observe all warning operating instructions, and follow all operating instructions;
Do not allow the supply voltage to exceed the specified range;
Do not allow the the use environment beyond the environment condition of the pod;
Do not make the camera's thermal imager to look directly at high-intensity radiation sources such as the
sun, carbon dioxide lasers, and electric welders including power on or off , in order to avoid damage to the
focal plane of pod;
All loads(include SSD) are protected from static electricity during use to avoid damage;
Pay attention to the protection of the internal interconnection and the external connection cable;
There are no user-serviceable parts inside the pod. Do not open the pod without the company permission,
or the consequences are the responsibility of the user;
Disconnect the power supply before cleaning the pod. Do not use chemical solvents, thinners, or spray
cleaners.
· Ensure that the interface definition on the airborne side is correct;
· Ensure that the supply voltage in the given range 3S~6S.
Bi-Focus
2019 FOXTECH All Rights Reserved
©
User Manual
3