Foxtech Bi-Focus User Manual page 11

Bi-Focus User Manual
Data: Data bits, according to Data length;
CRC: convert the rest into HEX, add up, and convert the result into asc-ii, except for the beginning. Two
bytes with the highest order in front.
Serial port configuration: baud rate: 115200, data bit: 8, stop bit: 1, check bit: none
The serial port controls of the ground terminal as follows:
1. Gimbal angle control, camera control and camera parameter configuration.
2. Gimbal angle control and camera control.
3. Gimbal speed control and camera control.
11
2019 FOXTECH All Rights Reserved
©