Labtech DigiBlock ED-S Series User Manual page 17

8min.
Step 04: Touch the Temp. Text box, input 150 via the digital key. Then touch Time
text box to input 60 which means holding temperature at 150C for 60min.
Step 05: Touch the Temp. Text box, input 150 via the digital key. Then touch Time
text box to input -1 which means stop the program after step 04.
Touch SAVE to save the method.
c) Touch Method Check to view and check the heating graph.
d) Touch Soil then Method2 to check if the programm heating curve you just set is
correct. Touch Save to quit the interface and select this programm.
e) In home page, touch RUN to start the selected programm.
f) When finish all the steps, the unit stops and buzzer screaming. Touch any key to
stop the buzzer.
5. SOLVENTS TABLE
DigiBlock – User Manual
17