Labtech DigiBlock ED-S Series User Manual page 14

1) Category selection: select desired method category located in the left column
2) Method selection: touch Method1 or Method2 buttons to select method 1 or 2
3) Step no.: Square min means temperature heating time (usually set to -2, that means
heat in max. heating speed); even number means temperature holding time.
Square °C means set temperature.
For last step of the program, please set to -1 to stop heating after time end. Max N°30
Steps.
4) Next: next page
5) Save: save modified parameters
Application
Edit a soil digestion method in Soil category, heat from room temperature to
100 ℃ and hold in 100 ℃ untill switch off the unit.
a) In home page, touch Setup to enter into method set interface.
DigiBlock – User Manual
14