Loading Cards - Canon ImageFormula R10 User Manual


If double-feeding occurs, reduce the number of pages that you load
into the scanner at one time.

When scanning small size of multiple documents such as receipt, use
documents which have the same width.

Depending on paper quality, you may hear unusual noises while
scanning some documents, but this does not indicate a malfunction.

Loading cards

Use the card slot when scanning plastic cards. Use the following
procedure to scan the cards one by one.
1
Open the document feed tray.
2
Turn the card face up, and insert the card straight into the card slot.
When the edge of the card touches the slot, the rollers will move automatically.
The roller will stop when it has caught the edge of the card, allowing you to let
go of the card and start scanning from an application.
The card will be fed when you start scanning with an application
program. After the card has been fed completely, the rollers will turn
in the opposite direction and scanning of the card will start.
The scanned card will be ejected from the front card slot.

The card slot is disabled when documents are placed on the feed tray.
When you want to insert a card in the card slot, remove any
documents from the feed tray.

During scanning, a portion of the card will protrude from the rear card
slot at the rear of the scanner. Keep the area in front of the rear card
slot clear of objects.

Embossed cards may not be scanned correctly, depending on the
type of embossment.
22