Canon ImageFormula R10 User Manual page 32

[Color mode]
Select the color mode for scanning from below.
Detect automatically Automatically determines the color mode based
on the document content and scans accordingly.
24-bit Color Scans the document in color.
Grayscale Scans the document in Grayscale.
Black and White Scans the document in black and white (binary).
[Page Size]
Select the paper size of the document to be scanned.
If you specify [Match original size], the page size of the scanned document
is detected and the images are saved at the detected size.
[Dots per inch]
Select the resolution.
Select [Detect automatically] and the software will automatically scan the
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the document.
If you select [Skip blank page], scanned images of blank pages are not
saved.
[Automatically straightens skewed images]
If a document is not straight when fed, the scanner detects that the
document is not straight from the scanned image and straightens the
skewed image.
Select the setting from below.
[OFF]
[Straightens with angle of fed documents]
[Straightens with angle contents of fed documents]
[Rotate image to match orientation of text]
Check [Enable] on to rotate the image in the same direction with the
characters.
[Use advanced settings dialog box]
Scan mode settings include basic items that are configured in [Scan
settings], and the settings that are configured in the advanced settings
dialog box. The settings in the advanced settings dialog box are applied
for settings other than the basic items.
If you set the [Enable] checkbox of [Use advanced settings dialog box] to
ON and click the [Settings] button, the advanced settings dialog box
appears.
The advanced settings dialog box includes setting items that are
the same as the basic items in [Scanner setting], but the setting for
each of the them is stored separately.
Which settings are used during scanning differs as follows
depending on the setting of the [Use advanced settings dialog box]
check box.
Setting of [Use advanced
settings dialog box]
OFF
ON
For details on the advanced settings dialog box, see "Configuration
and Functions of the Advanced Settings Dialog Box."
General
Set the following items as occasion demands.
Name
Enter the name to be displayed in the Scan mode panel.
32
Basic items Other than basic
items
Settings of Settings of the
[Scanner setting] advanced settings
dialog box
Settings of the advanced settings dialog
box