Gold Note VALORE 425 PLUS User Manual page 10

INSTALLING THE PLATTER
INSTRUCTIONS
1 Remove plug from the middle of the turntable
2 Insert the Ball Bearing into the Bearing Housing* of the
turntable taking care to center it on the bottom seat
3 Oil the Platter Spindle as shown in figure 3
4 Insert the Platter Spindle into the Bearing Housing
5 Lay the Platter on the Platter Spindle
6 Secure the Platter Spindle Tip in the threaded hole of the
Platter Spindle
2
5
*PLEASE NOTE: the Bearing Housing is already installed in the plinth of the turntable. Do not remove it.
9
1
2 DROPS 3 DROPS
3
6
4