Gold Note VALORE 425 PLUS User Manual page 5

INTRODUCTION
GOLD NOTE® manufactures a wide range of prestigious
and sophisticated audio products featuring unique and
innovative technical and aesthetic characteristics.
The Valore 425 Plus is the definitive evolution of the
Valore (400mm) produced by Gold Note since 2010, one
of the most successful Gold Note High-End Audio
turntables created to combine audio performance with high
quality finishes.
The Valore 425 Plus features a 30mm thick plinth
precisely shaped around the platter's bearing system and
the motor to drastically reduce all vibrations.
The Valore 425 Plus platter is 23mm thick and made of
acrylic.
The design of the platter and the 60mm long platter
bearing and spindle system come directly from our top
level turntables and are finely machined to make this
turntable the best performer of the category.
The Valore 425 Plus platter is designed to spin as close
as possible to the plinth (only 3mm) thus reducing
turbulence and achieving a great noiseless rotational
stability.
The turntable features a 12Volt synchronous motor
electronically controlled by our PWM technology.
The PWM - Pulse Width Modulator - transforms the power
voltage in three steps, AC-DC-AC, enhancing the best
coupling of the AC semi-waves to cancel motor resistance
and vibrations allowing the highest motor torque at the
same time.
Every Gold Note product is 100% proudly designed, manufactured and assembled in Italy
4
The PWM - Pulse Width Modulator - transforms the power
voltage in three steps, AC-DC-AC, enhancing the best
coupling of the AC semi-waves to cancel motor resistance
and vibrations allowing the highest motor torque at the
same time.
The Power Supply electronically controls the 33⅓ rpm,
the 45rpm modes and the fine speed adjustment storing
the selection permanently in memory even when
disconnected from the power.
The new perfectly polished hourglass motor pulley also
allows the turntable belt to spin smoothly thus reducing
the wow&flutter and noise as never before.
The Valore 425 Plus can be equipped with 9" tonearms
of any manufacturer thus allowing many options and
combinations.
As standard, Valore 425 Plus is offered completed with a
Gold Note dedicated 9" arm and the Dust Cover.
The Valore 425 Plus is an extraordinary good turntable
that can be enjoyed in a large variety of prestigious High-
End Audio systems: extremely reliable and easy to use, it
is the ideal choice for all audio enthusiast looking for
audio quality, elegance and efficiency at the same time.
Valore 425 Plus is available lacquered in black or white,
or even in real Italian leather (on demand).
As Special Edition of Valore 425 Plus is completely made of
transparent Acrylic and with a 23mm thick plinth - finely
handcrafted - to achieve higher dampening and improve
the audio quality due to the qualities of the material.