Safety Instructions Governing Specific Operational Phases - Mercury TP-702-59 Operation, Safety & Spare Parts Manual

1.3 Safety Instructions Governing Specific Operational Phases

Avoid unsafe operation of the equipment.

The machine is only to be operated when it is in good running order. Only operate the

equipment in a safe manner; all protective and safety devices must be in place and fully
functional. This includes removable safety devices, emergency shut-off equipment,
noise-protection devices and exhaust fans.
The machine is to be checked for damage and defects at least once each work shift. Any

changes, including the working behavior of the machine, are to be reported immediately.
If necessary, the machine is to be stopped and locked-out immediately.
In case of a malfunction, the strapping machine is to be immediately stopped and

locked-out until the fault has been eliminated.
Before starting the strapping machine, make sure that the area is clear and safe.

Do not place any tools or parts onto the machine.

Operating personnel needs to be well trained before executing special operations and

maintenance work; this work needs to be done with the proper supervision.
Always check and tighten connections after maintenance or repair.

After completing maintenance or repair, all safety devices must be replaced and checked

for functionality before operating the equipment.
To minimize the environmental impact, all consumables and replaced parts must be

disposed of safely.
Before starting the machine, check that the accessories have been stowed away safely.

Avoid operating the machine in a fashion that could upset its stability.

-A2-