Before Operating; During Operation; After Operating - Mercury TP-702-59 Operation, Safety & Spare Parts Manual

1.6 Before Operating

Read the instruction manual before operating the machine for your safety.

Wear eye protection and safety gloves before operating this machine.

Eye protection must be worn
Verify that the power line voltage is correct.

The machine must be properly grounded to avoid a shock hazard. All wiring must be

in accordance with local wiring standards.
The strapping machine can only be operated with polypropylene (PP) strapping;

do not use polyester (PET) strapping or polyethylene (PE) cord strap.

1.7 During Operation

The weight of the package cannot exceed 25kg (55 lbs).

It may be necessary to use lifting aids for handling products that exceed 25kg(55 lbs).

The size of the package should not be less than 70 mm × 20 mm (2.75 inches × 0.75

inches).
While running, check the unit for any unusual sounds or smoke emissions.

Keep away from the inside of the arch while the machine is operating; do not put your

hands or body into the arch when the machine is running.
NOTE: it is normal for the heater tongue to smoke during the sealing operation.

1.8 After Operating

Remove dust and dirt from the unit; pay particular attention to the interior of the arch.

Turn off the power when the machine is not in use.

Safety gloves must be worn
-A4-