Machine Information; Areas Of Application; Environment Information - Mercury TP-702-59 Operation, Safety & Spare Parts Manual

2 Machine Information

2.1

Areas of Application

The strapping machine is to be used for strapping packages, cartons, paper boxes,
newspapers, magazines and those materials using a polypropylene (PP) strapping for
stabilizing purposes when in transportation. Be careful for rigidity of working materials,
and don't try to pack agri-foodstuffs or other such material.
This machine was designed for certain applications only. We strongly recommend that this
machine NOT be modified and/or used for any application other than for which it was
designed. If you have any questions relative to its application DO NOT use the machine
until you have had detail instruction from your dealer.

2.2 Environment Information

The strapping machine shall be installed in the following conditions:
Supply voltage: 0.9 - 1.1 nominal supply voltage

Source frequency: 0.99 - 1.01 nominal frequency

Ambient temperature: 5°C - 40°C (41℉-104℉).

Altitude: shall be at altitudes up to 1000m above mean sea level.

Relative humidity: not exceed 50% at 40°C.

Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.

Avoid exposing to abnormal vibration.

Don't use machine in dangerous environment.

Don't use machines in damp or wet locations, or expose them to rain.

Please provide a suitable illumination around the machine for safety operation.

Work place of user should have a fire extinguisher or other devices that meet their local

safety regulations, and always be careful.
Internal parts requiring frequent inspection and adjustment, and maintenance areas must

be provided with a suitable illumination around the machine.
If there may be harmful gases, fumes or dust generated during heating, user or system
integrator must install exhaust system for the extraction of harmful substances.
The exhaust system shall be positioned according to the vent location. Please refer
to the figure.
-A6-